1. The following types of toilets must not be bought

1. You can't buy light-weight toilets

If the toilet is too light, congratulations on successfully avoiding a big trap. Usually the better the toilet, the heavier quality. Ordinary household toilets are basically around 25kg, even as high as 40kg. And if the quality of the toilet is less than 20kg, it can only mean that the manufacturer has cut corners in the production. This type of toilet has been bought home with money, and it is just a decoration. The service life cannot be guaranteed, and it will have to be replaced within a year!

2. You can't buy a toilet with a thick glazed surface

A good toilet, in order to prevent dirt from hanging on the wall, the surface of the glaze and the body are very smooth. When selecting, you can directly inspect the inner wall and sewer by hand. If the touch is delicate, it must be good. On the contrary, inferior toilets have obvious roughness, and there are even obvious granular and fine small bubbles on the surface. If you encounter this type of toilet, you should run away. I have to clean the inner wall every three days after I buy it home, which really affects my life!

3. The toilet with high water absorption rate cannot be bought

The level of water absorption depends on the high-temperature fired quality of the toilet. The high-temperature fired toilet has a low water absorption rate, which is not easy to absorb sewage and produce peculiar smell. The toilet with high water absorption is prone to smelly and difficult to clean. Over time, it is more likely to crack and leak. To test whether the toilet is fired at high temperature, you can tap the toilet lightly with your hands. If the sound is hoarse and not crisp, it is likely to have internal cracks or the product is not cooked.

4. The toilet with a small sewage outlet cannot be bought

The drainage power directly determines whether it will be blocked or not! Therefore, you must buy a large-diameter sewage pipe for the sewage outlet. Don't choose a vortex toilet. The water is slow and the impulse is weak. Sometimes the dirt is too large to flush directly. For home life, it is recommended that you choose a straight-flush siphon toilet. In comparison, it has higher performance, less water and greater impulse, which can greatly reduce the problem of toilet blockage!

2. While avoiding the above 4 kinds of pits, you need to pay attention to the following points when purchasing a toilet:

1. The glazed surface of the toilet

What we can see from the surface of the toilet is the glazed surface of the toilet. We can touch the glazed layer of the entire toilet with our hands. The overall glazed surface of a good toilet is smooth and flat without bubbling and granular things. A good glaze has a strong self-cleaning ability, and it is not prone to yellowing and stains after many years of use. Then stretch your hand into the toilet drain and check whether it is rough. If it is rough, it means that the toilet is not fully glazed, and it is easy to get stains in the later stage, which is not suitable for cleaning, which will also affect the drain.